Product Documentation If you ordered accessories for your device, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the device for service. ! 2 Device Features Right button Left button User window Battery Scanner Scanner button Finger Strap Wearable accessory release buttons Battery release buttons Right button Left button User window Battery Scanner Scan Trigger Finger Strap Wearable accessory release buttons Battery release buttons 3 Charging the Battery The 8690i mini wearable mobile computer ships with a partially charged battery. The battery must be fully charged before first use.
MB12A-SCN07 We recommend the use of Honeywell accessories and power adapters. Use of non-Honeywell accessories or power adapters may cause damage not covered by the warranty. 4 Install the Battery The device ships with a 3.7V, 3400 mAh battery manufactured by Honeywell International Inc.
5 Replace the Battery Note: The battery should be replaced in an environment free from excessive dust or particulate to avoid an internal buildup of dust in the unit. When the battery is low, the 8690i beeps and vibrates and the window shows a Battery Low warning. You can also press both the right and left buttons at any time to view the battery’s charge status. To replace the battery, squeeze the battery latch and lift up on the battery. Replace the battery by aligning with the side of device and snapping it in to the device. 6 Right or Left Handed Operation To release the finger trigger, turn over the device. Press the two release buttons on either side of the trigger. Rotate the trigger and snap it into place to change the operation to the correct hand. 180º 7 Attach the Device to Your Fingers 8 Pull the free end through the loop the press the excess down to secure the strap. 9 Power Up the Device Press the trigger to power up the device. The battery, WiFi, and Bluetooth status appear in the window. User Window The user window displays prompts for using the device in your environment. The buttons to the left and right of the window are used to scroll through the windows or to enter responses to screen prompts.
Press both the right and left buttons at the same time to view the WiFi, Bluetooth, and battery status. Press and hold the left button for 6 seconds to restart the device. 95% 10 Wrist Position When Scanning How to Scan a Barcode The 8690i scanner has a view finder that projects a bright aim- ing pattern. This aiming pattern should be centered over the barcode, but it can be positioned in any direction for a good read. ! 11 Connect the Device via Bluetooth® Pair with a PC or Laptop Bluetooth Serial Port: Host Reconnect Mode The 8690i can pair with host Bluetooth devices such as personal computers, laptops, and tablets. In this mode, the host will continually attempt to connect with the device. If the device and the host become disconnected, the host will manage the recon- nection.
(Refer to your host device’s User Guide for pairing instructions.
When your host device has located the 8690i, you can select it from the list displayed. Note: Refer to the 8690i User Guide if your host device displays a PIN. The Bluetooth symbol appears in the device window when the device pairs with a host. Host Reconnect Mode 12 Pair with a PC or Laptop Bluetooth: HID Keyboard Mode In this mode, the 8690i pairs with a Bluetooth device using a HID keyboard.
(Refer to your host device’s User Guide for pairing instructions.
When your host device has located the 8690i, you can select it from the list displayed. Note: Refer to the 8690i User Guide if your host device displays a PIN. The Bluetooth symbol appears in the device window when the device pairs with a host. Bluetooth HID Keyboard Connect 13 Disconnect from the Host Once your device has been connected to a host, you must dis- connect it in order to communicate with a different device. Scan the Bluetooth Disconnect barcode to unlink the device from the currently linked host. Pair with an Androidâ„¢ Mobile Device Tap and Pair You can pair your Androidâ„¢ phone with the 8690i by touching the devices together.
The phone recognizes the device and prompts you to pair.
Verify the pairing of the 8690i in your phone’s Bluetooth settings. Bluetooth Disconnect 14 Pair with an Android, Apple™ or Windows® Mobile Device 1. The 8690i can pair with Android, Apple, and Windows mobile devices, excluding Windows CE and Mobile.Set your mobile device so it searches for other Bluetooth devices. (Refer to your mobile device’s User Guide for pairing instructions.
On the mobile device, the 8690i device is shown as a keyboard.
The Bluetooth symbol appears in the device window when the device pairs with a mobile device. Bluetooth HID Keyboard Connect 15 Pair with a Honeywell Vehicle Mount Computer The 8690i can pair with Honeywell vehicle mount computers, such as the Thor VM1 or VM2, or with Tecton mobile computers.