Guidelines are subject to change without notice. ©2021 ZIH Corp.
Specifying inlay placement for ZQ511 and ZQ521 RFID mobile printers Zebra ZQ521 and ZQ511 RFID printers do not require specific inlay placements. The patented coupler antenna and RFID calibration algorithm automatically configures optimal RFID settings for the inlay, chip, and label size being used. See the User’s Manual and RFID ZPL Programming Guide 3 for more details. Zebra manufacturers RFID labels optimized for ZQ511R and ZQ521R.
Inlays should be centered across the media width with position tolerance of +/- 2mm (parameter ‘a’ in the diagram on the right). For labels longer than ~1”, place inlays ~10-15mm from the trailing edge of the black mark with a production tolerance of +/- 2mm (parameter ‘x’ in the diagram on the right). This can be minimized or eliminated by designing the label to maximize distance ‘x’, as shown in the diagram on the right. The RFID coupler antenna is located in the center of the media path, directly behind the printhead. Approximate location of the encode zone is shown below.