Wasp WDT2200

NOTICE This unit is equipped with a Li-ion battery pack. Battery power might be low due to storage. For procedures on how to charge the battery, please refer to page 5. . © 2003 Wasp Technologies, Inc. Chapter 1: Introduction 1.1 Overview Thank you for choosing this product from Wasp Technologies, Inc.

Buy Wasp WDT2200 from BackUp BarCode Systems, Inc.

NOTICE This unit is equipped with a Li-ion battery pack. Battery power might be low due to storage.

For procedures on how to charge the battery, please refer to page 5. . © 2003 Wasp Technologies, Inc.

Chapter 1: Introduction 1.1 Overview Thank you for choosing this product from Wasp Technologies, Inc. The WDT2200 portable data collection terminal is one of the most versatile handheld computers available. It is DOS compatible, capable of running programs developed with the C language. The WDT2200 has many pre-built in functions and is also user- programmable. The WDT2200 is light, weights only 230 grams, has a large liquid crystal display (128 pixel X 64 pixel, capable of displaying 16*8 or 8*4 characters,) is rugged and water proof. It also capable of withstanding multiple 1.5 meter drops. Depending on you’re the particular model you had purchased, your terminal is equipped with 2.5MB Laser or CCD Scanner. The WDT2200 also has offers optional RS232 communication/charging cradled. Working with the WDT2200’s unique universal power adaptor, the cradles will satisfy your WDT2200’s charging and communication needs. 1.2 Support Contact Wasp Technologies Technical Support via http://support.waspbarcode.com 1.3 Customized WDT2200 It is highly likely when you receive this terminal; that a system integrator has already program your terminal to meet your specific application. If this is the case, many operating procedures, mentioned in this manual, may not apply. Please consult your system provider for more information regarding such customization. . © 2003 Wasp Technologies, Inc.

1.5 Quick Start This section is designed to let you quickly getting familiar with the WDT2200. If you need a detail explanation of any of the functions please refer to the chapters which follow.

WDT2200 Accessories Figure 0-7: WDT2200 charging / communication cable Remove Backup Battery Isolator To prevent power loss during shipping or storage, when you first receive your WDT2200, you will find its backup battery has been isolated from the contact pin with a transparent plastic film. This may have been removed by the vendor. If not, remove the insulating film before proceeding.

Remove the battery door from the WDT2200 by turning the screw on the battery cover counterclockwise.

Insert the battery into the main battery chamber by sliding the head (the end with two protruding terminals) into position first.

Reinstall the battery door and tighten the screw. Cradle The main battery can be charged by docking it with the WDT2200 charging/communication cradle or by connecting it directly to a charging /communication cable. Charging Before using the WDT2200, the main battery must be installed and fully charged.

It will take 2 to 3 hours to fully charge the main battery. Cradle LED Icons This icon indicates communication in progress. When the WDT2200 is transferring data to or from the host computer. This LED will flash, showing that the data is transferring.

When the cradle is charging the battery; the LED will be red; when fully charged, the LED will turn green. T This LED shows the power status of the cradle itself. When it is lit, the cradle is powered. Power On After fully charging the unit, it will be ready for use and may be turned on. Press the power key on the keypad to turn on the WDT2200. . © 2003 Wasp Technologies, Inc.

Communication with the Host . © 2003 Wasp Technologies, Inc.

6 Interface Ports The WDT2200 communicates with the PC via an RS232 communication port located at the tail of the unit. You can connect the unit via the charging / communication cable to a PC’s RS232 jack for data transfer or connect it through a cradle. 1.7 Using the Keyboard The keypad of the WDT2200 has of 27 rubber keys and can toggle between three different modes: numeric mode, command mode, and alphabetic mode. All keys except the power key may produce a sound (tone) when pressed. Keys in the upper four rows are larger in size to facilitate data entry. When the unit is off, press the power key to turn it on. When the unit is on, press and hold down the power key for about one second to turn it off. [CMD] Pressing the [CMD] key plus the desired function key (located near the bottom of the keypad) allows you to perform command functions. [ESC] In command or Supervisor mode, press the [ESC] key to jump back to the previous menu. . © 2003 Wasp Technologies, Inc.

++Figure 0-8: WDT2200 Keypad layout Numeric mode The keyboard of the WDT2200 is initialized to normal mode after it the unit is powered on. In normal mode, the cursor is a block sign and the keyboard is mainly used to input numeric data and the F1 through F4 function keys. COMMAND mode Press the [CMD] key sets the keyboard to command mode. In command mode, the cursor type stays the same and the keyboard is mainly used to input special characters, perform hot-key functions, and use the F5 through F8 function keys. ALPHA mode Press the [ALPHA] key to toggle the keyboard between normal (numeric) mode and alpha mode. In the alpha mode, the cursor is an underscore and the keyboard is available to input upper case letters. In alpha mode, each numeric key contains three alphabetic characters. Press the desired key once to get the first character, twice to get the second character and three times to get the third character.

wdt2200 operation guide

wdt2200 quick start guide

wdt2200 user reference guide

Showing the single result

Manufacturers We Support

Scroll to Top