Fixed Help Selector

 

Serial Port Configuration

The serial port configuration can be done using this page. The current serial port configuration is retrieved and displayed before the serial port configuration settings are changed. Also after changing the serial configuration, reader needs to be rebooted before the changes take effect.


  • Serial Port can be configured as below:
    • Debug Port
    • Push Data Port
    • Free port

  • Debug Port - This is the default out of the box configuration enabled on FX9600 readers. In this configuration RS232 port can be used as debug port with below default configuration:
    • Baudrate: 115200
    • Data: 8 bits
    • Stop: 1 bit
    • Parity: None
    • Flow Control: None
    In this mode reader will not be able to push any tag data over serial port.

  • Push Data Port - In this configuration serial port will be freed from being used as debug port and it will support pushing tag reports over serial port. In this mode, serial port configuration can be customized as per the need. It will have also options to choose the tag data configuration like Antenna ID, Session, Antenna Power or Tag Count etc that are part of the pushed tag data. If serial port is chosen as Push Data Port then we should also provide options to configure Data, which need to be pushed over serial port. These configurations will tell what need to be pushed over serial port when serial is configured as push data port.

  • Inventory(Start/Stop) - The image displays the running status of inventory as indicated below. Click the image to toggle the status. This is applicable only when the serial port is configured as Push Data Port.


  • App Running Indicates Inventory is running
    App Not Running Indicates Inventory is not running
  • Free Port - This option frees the serial port from internal usage. In this mode serial port can be used by any user application to send/receive any data over serial port. In this mode it will be responsibility of user application to configure the serial port as per their requirement.

  • Save - Click on this to save the configuration settings for selected serial port.